The Finite Element Analysis of Connecting Rod of Diesel Engi(2)

2021-02-21 08:04

柴油机连杆的有限元分析 英文资料

The solution of (4) is the eigenvalue ,and ωithe square root ωiis the circumferential rate(rad/s). So the inherent frequencies can be solved.

fi=ωi/(2π) (5)

B. Modal analysis of the connecting rod

As the structure of the connecting rod is very complex, generally it was separately made. Because of the separate of the connecting rod shaft and the connecting rod cap, many components such as connecting rod buses, connecting rod bearing shells, and connecting rod bolts. In order to conveniently analyze the connecting rod, without affecting the calculate accuracy, some parts of the connecting rod and the connecting rod shaft were integrated to simplify the link mechanism.

Make the simplified connecting rod 3D model scatter with the Hyperworks software, and divided it into 7636

nodes, 28866 units.

Figure 2. The finite element model of the connecting rod

2

III. THE ANALYSIS RESULT OF THE MODAL

ANALYZE OF THE CONNECTING ROD According to the actual situation, all the points of the inner eye were coupled to a point which was created in the center of the inner connecting rod top end eye with the HyperWorks. And all the points of the inner connecting rod button end eye were coupled to the points created in the center of the inner connecting rod button end eye. The generated document with a suffix of “dat” was run in Nastran to get the modal of the connecting rod flexible-body model. Then the generated document with a suffix of “op2”was run in the HyperWorks, and HyperWorks and Nastran were connected. In the end, the modal of the connecting rod was analyzed with the HyperWorks, the early 10-order oscillating frequency and shapes were got as follow:

TABLE 2 : THE FREE OSCILLATING FREQUENCY OF THE CONNECTING ROD

(a) Piston (b) Connecting rod

Number

1 2

Frequency(Hz)

1211 1636 1700 3550 4695

Number 6 7 8 9 10

Frequency(Hz)

5328 6782 6881 8370 9422

3 4 5

(c) Crankshaft and flywheel (d) Crank link mechanism

Figure 1. 3D model of the Crank link mechanism

TABLE 1: THE CHARACTERISTIC OF THE CONNECTING ROD MATERIAL

Material Steel 45 Modulus of elasticity

Poisson's ratio

2E11 0.3

Figure 3. the first and the second orders oscillating shapes of the

connecting rod

Density 8050 Yield limit

σS

355MPa

Figure 4. the third and the fourth orders oscillating shapes of the

connecting rod


The Finite Element Analysis of Connecting Rod of Diesel Engi(2).doc 将本文的Word文档下载到电脑 下载失败或者文档不完整,请联系客服人员解决!

下一篇:试论广播情感类节目主持人语言表现力的能动作用

相关阅读
本类排行
× 注册会员免费下载(下载后可以自由复制和排版)

马上注册会员

注:下载文档有可能“只有目录或者内容不全”等情况,请下载之前注意辨别,如果您已付费且无法下载或内容有问题,请联系我们协助你处理。
微信: QQ: