The Finite Element Analysis of Connecting Rod of Diesel Engi(3)

2021-02-21 08:04

柴油机连杆的有限元分析 英文资料

Figure 5. the fifth and the sixth orders oscillating shapes of the

connecting rod

When the engine was running, as the cyclical changing inertia force transferred from the crankshaft pin acting on the connecting rod top end, and the torque transferred from the crankshaft acting on the connecting rod bottom end, the connecting rod was twisted and bended terribly, and oscillation was caused. Generally, the connecting rod was separately produced, long, the Stiffness and the connatural frequency were small, and force received by the connecting rod ends was very complex, so the resonance happened usually may destroyed the connecting rod.

Therefore, in order to improve the life of the connecting rod, assure the connecting rod working safely, the connatural frequency should be amended, the dangerous frequency should be evaded with the analyzing result in design. IV. THE MULTI-FLEXIBLE-BODY DYNAMICS MODEL AND SIMULATION ANALYSIS RESULT The flexible-body of the crankshaft group model was built in the ADAMS/View with the modal document (.mnf) of the crankshaft group. The flexible-body of the crankshaft group was replaced with the rigid model in the multi-rigid-body model of the crank link mechanism, then the sub-model was founded in the center of the crankshaft pin and the bottom and the top end of the connecting rod, and the crankshaft group, connecting rod and the piston group were connected according to there working rule. In the end, an eruptible force brought to bear on the piston top made the crankshaft running with a speed of 2000r/min, then the multi-flexible-body dynamics model was created in the ADAMS/View.

The multi-flexible-body model of the crank link mechanism kept running for 0.6s, 600steps, in a cycle, the biggest VON MISES stress of the crankshaft is 32.8789MPa, the biggest main stress is 40.4114MPa, the smallest main stress is 6.49541MPa.

Figure 6. the seventh and the eighth orders oscillating shapes of the

connecting rod

Figure 7. the ninth and the tenth orders oscillating shapes of the

connecting rod

The first orders oscillating shapes: It was one-order unitary bending oscillating shape, the button end and the top end of the connecting rod were in the Y-Z plane,and was bended around the center of the connecting rod shaft.

The second order oscillating shape: it was one-order unitary bending oscillating shape, the button end and the top end of the connecting rod were in the X-Z plane,and was bended around the center of the connecting rod shaft.

The third order oscillating shape: it was one-order unitary twisting oscillating shape, and the connecting rod top end was twisted around the Z axis.

The fourth order oscillating shape: it was two-order unitary bending oscillating shape, the button end and the top end of the connecting rod were bended right-about in the X-Z plane.

The fifth order oscillating shape: it was two-order unitary bending oscillating shape, the button end and the top end of the connecting rod were bended right-about in the Y-Z plane. The sixth order oscillating shape: it was one-order unitary extending and crushing oscillating shape, the connecting rod button end was extended and crushed on the Z axis.

Form the seventh to tenth order oscillating shape: bending, extending, crushing and twisting oscillating shapes were happened alternately. Sometimes the two-order unitary bending happened, sometimes the extending and twisting happened, and the bending and twisting positions were different.

Figure 8. The multi-rigid-body dynamics model and the multi-flexible-

body dynamics model of the crank link mechanism

(a)


The Finite Element Analysis of Connecting Rod of Diesel Engi(3).doc 将本文的Word文档下载到电脑 下载失败或者文档不完整,请联系客服人员解决!

下一篇:试论广播情感类节目主持人语言表现力的能动作用

相关阅读
本类排行
× 注册会员免费下载(下载后可以自由复制和排版)

马上注册会员

注:下载文档有可能“只有目录或者内容不全”等情况,请下载之前注意辨别,如果您已付费且无法下载或内容有问题,请联系我们协助你处理。
微信: QQ: