Figure 1 – Stand-Alone Video Stabilization System
Lab Procedure:
1. From MATLAB, navigate to
C:\SpeedWay\Fall_08\co_processing\lab5 and double click the SAD_fpga_coprocessor_start.mdl file to open it in Simulink.
2. Hold down the Ctrl key and type ‘A’ to select All blocks, then hold down the Ctrl key
and type ‘G’ to create a subsystem. Rename the new subsystem ‘sad’.
3. In preparation for augmenting the SAD with a VLYNQ interface, you will add
several blocks from the Xilinx Blockset, starting with a ‘To Register’ shown below.
Figure 2 – Adding a Shared Memory ‘To Register’
The table below shows the locations of the next blocks to be added.
Block Constant
System Generator
Library
Xilinx Blockset > Basic Elements Xilinx Blockset > Basic Elements
Quantity
1 1
Block
Terminator
Library
Simulink > Sinks
Quantity
1
Figure 3 – Adding Boolean constant block