技术协议
项目名称：首钢京唐钢铁联合有限责任公司设备名称：悬臂堆料机招标编号：
原料场工程
ST2400.35 0710-0640SSTCJT46/07
大连华锐股份有限公司 二00六年十一月
悬臂堆料机ST2400.35 技术协议目录
目 录
总则 ······················································································································· 1 第一章 设计条件和环境条件 ············································································ 2 第二章 设备规范 ································································································· 4 第三章 技术条件 ································································································· 9 第四章 电气和控制部分 ··················································································· 25 第五章 涂漆和表面处理 ··················································································· 48 第六章 消防装置 ································································································ 53 第七章 噪音控制 ································································································ 54 第八章 标记和铭牌···························································································· 54 第九章 质量保证和试验 ··················································································· 55 第十章 供货范围 ······························································································· 57 第十一章 技术资料及交付进度 ······································································· 68 第十二章 设备包装与运输 ··············································································· 70 第十三章 技术服务与联络 ··············································································· 71 第十四章 设备监造与检验 ··············································································· 74 第十五章 性能验收与试验 ··············································································· 76 第十六章 性能保证及性能考核 ······································································· 78 第十七章 质量要求与质量保证 ······································································· 79
悬臂堆料机ST2400.35 技术协议 总则
1.本协议用于首钢京唐钢铁联合有限责任公司原料场工程的ST2400.35型悬臂堆料机的设计、结构、功能、性能、制造、供货、安装、调试、试验和验收等方面的技术要求。
2.本协议提出的为最低限度的技术要求，并未对一切技术细节作出规定。也未充分引述有关的标准和规范的条文，卖方提供符合本协议和有关工业标准的优质产品及其相应服务。对国家有关安全、环保、节能等强制性标准必须满足其要求。
3. 卖方在设备设计和制造中所涉及的各项规程、规范和标准遵循现行最新版本的中国国家标准。本协议所使用的标准如遇与卖方所执行的标准不一致时，按较高标准执行。
4. 卖方对设备采用的专利涉及到的全部内容负全责，卖方保证买方不承担有关设备专利的一切责任。
5. 本技术协议将作为订货合同的附件，与合同正文具有同等效力。 6. 本设备及其零部件不准以任何方式或形式进行转包、分包制造。
7. 卖方对所供的ST2400.35型悬臂堆料机（包括买方认可的外购产品）负有全责。
8. 在合同签订以后，设备验收前，买方为使设备更加完善有权提出一些补充要求。具体项目由买卖双方共同商定。
9.交货时间的调整必须经买卖双方的一致同意。
1
悬臂堆料机ST2400.35 技术协议 第一章 设计条件和环境条件
1.1设备工作环境条件 环境条件
气温： 年平均温度：
11.4℃
年极端最高气温： 36.3℃ 年极端最低气温： -20.9 ℃ 湿度：
年平均相对湿度： 66 % 降水：
年平均降水量： 554.9mm 年最大降水量： 934.4mm 日最大降水量： 186.9mm 风速：
最大风速： 25m/s 年平均风速： 5.3 m/s 全年≥7级风的出现频率为4.9% 地震基本烈度： 7 级 1.2 物料特性
物 料： 焦煤、电厂用煤、高炉喷吹煤 粒 度： 0～ 30 mm (偶有大块≤200mm) 堆积密度： 0.8～1 t/m3 安 息 角： 35° ～45° 含 水 率： <14 ％ 1.3整体描述
本技术协议书中所描述的悬臂堆料机 ST2400.35安装在首钢京唐钢铁联合有限责任公司原料场贮煤场，设备使用寿命30年。
本技术协议中所描述的悬臂堆料机 ST2400.35具备远程监视功能（不低于秦五期设计水平）。主要是指斗轮取料机作业，可以通过中控远程监视，设备本身实现寻堆认址、人工定位，整机自动取料，从而实现流畅和比较高效的自动取料
2
悬臂堆料机ST2400.35 技术协议 作业。中控室能够对作业过程进行监视（预留能够满足远程控制的操作接口）。 1.4使用地点
首钢京唐钢铁联合有限责任公司原料场。
2007年10月到货,2008年1月安装调试完毕达到交钥匙水平。。 1.5 使用概况
悬臂堆料机 ST2400.35安装在料场的轨道上，用于堆煤作业。悬臂堆料机为连续工作制，每天三班作业，各机构可单独动作，也可联合动作。
悬臂堆料机采用交流10kV高压供电。
3