UFGS 02 66 10 Test Fill
the text by basic designation only and listed in
this paragraph by organization, designation, date,
and http://www.77cn.com.cne the Reference Wizard's Check Reference feature
when you add a RID outside of the Section's
Reference Article to automatically place the
reference in the Reference Article. Also use the
Reference Wizard's Check Reference feature to update the issue dates.
References not used in the text will automatically
be deleted from this section of the project specification when you choose to reconcile references in the publish print process.**************************************************************************The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.
ASTM INTERNATIONAL (ASTM)ASTM D1556ASTM D2167ASTM D2216ASTM D422ASTM D4318ASTM D4643(2007) Density and Unit Weight of Soil in Place by the Sand-Cone Method(2008) Density and Unit Weight of Soil in Place by the Rubber Balloon Method(2010) Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass(1963; R 2007) Particle-Size Analysis of Soils(2010) Liquid Limit, Plastic Limit, and Plasticity Index of Soils(2008) Determination of Water (Moisture) Content of Soil by the Microwave Oven Method
(2010) Measurement of Hydraulic
Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter(2010) Standard Test Method for In-Place
Density and Water Content of Soil and
Soil-Aggregate by Nuclear Methods (Shallow
Depth)ASTM D5084ASTM D6938
1.2 SYSTEM DESCRIPTIONSubmit a construction plan for the test fill. Test fill construction shall not begin until the test fill construction plan is approved. The materials proposed for use in the test fill and interface friction testing shall also be approved prior to the start of test fill construction. The plan shall include, but shall not be limited to, the following items: