AS 2537-1994 包含修订本No.1
Australian StandardTM
Mechanical jointing fittings for use with cross-linked polyethylene (PE-X) pipe for hot and cold water applications
澳大利亚标准
TM
与使用冷热水的交联聚乙烯管(PE-X) 配合使用的机械连接件
1
This Australian Standard was prepared by Committee PL-002, Cross-Linked Polyethylene Pipe. It was approved on behalf of the Council of Standards Australia on 5 September 1994 and published on 14 November 1994.
本澳大利亚标准是由PL-002交联聚乙烯管委员会编制的，并由该委员会代表澳大利亚标准委员会于1994年9月5日批准，于1994年9月14日出版。
The following are represented on Committee PL-002: PL-002委员会由以下单位参加： Australian Institute of Building 澳大利亚建筑标准委员会
Department of Primary Industries,Qld 昆士兰州第一产业局
Engineering and Water Supply Department, SA 南澳工程和供水部 Hunter Water Corporation SA Hunter Water公司
Metal Trades Industry Association of Australia 澳大利亚金属贸易工业协会
Plastics and Chemicals Industries Association 塑料和化学制品行业工业协会 Water Authority of Western Australia 西澳水务监督署
Water Board, Sydney—Illawarra—Blue Mountains 水利管理机构，悉尼—伊拉瓦拉（Illawarra）—蓝山
Keeping Standards up-to-date
关于标准的更新
Standards are living documents which reflect progress in science, technology and systems. To maintain their currency, all Standards are periodically reviewed, and new editions are published. Between editions, amendments may be issued. Standards may also be withdrawn. It is important that readers assure themselves they are using a current Standard, which should include any amendments which may have been published since the Standard was purchased.
标准是应适时更新的文件体系，反映人们在科学、技术及系统方面取得的进步。为了保持标准的版本最新，所有标准都得定期进行评审并出版新的版本。在刊印不同版本期间，可能还会发行标准的修正内容。标准也可能会被取消。因此，读者使用的版本必须是最新版本，其中应包括在购买标准以来出版的所有修正版本的内容。
Detailed information about Standards can be found by visiting the Standards Australia web site at www.standards.com.au and looking up the relevant Standard in the on-line catalogue.
有关标准的详细信息可以访问澳大利亚标准局的网站（www.standards.com.au），并查阅在线目录
里的相关标准。
Alternatively, the printed Catalogue provides information current at 1 January each year, and the monthly magazine, The Australian Standard, has a full listing of revisions and amendments published each month.
另外，印刷的标准目录提供每年1月1日刊印的最新信息。澳大利亚标准这本月刊在每月出刊时，都会完整地介绍当月出版和发行的标准修订本和增补内容。
We also welcome suggestions for improvement in our Standards, and especially encourage readers to notify us immediately of any apparent inaccuracies or ambiguities. Contact us via email at mail@standards.com.au, or write to the Chief Executive, Standards Australia International Ltd, GPO Box 5420, Sydney, NSW 2001.
我们也欢迎提出有关我们标准改进的建议，并特别鼓励读者将任何明显的不准确或含糊不清的内容及时告诉我们。读者可以通过电子邮件联系我们(mail@standards.com.au)，也可以写信和我们联系，地址是：Chief Executive, Standards Australia International Ltd, PO Box 1055, Strathfield, NSW 2135
This Standard was issued in draft form for comment as DR 93132.
本标准以草案DR 93132形式发布用于征求意见
TM
Australian Standard
Mechanical jointing fittings for use with cross-linked polyethylene (PE-X) pipe for hot and cold water applications
澳大利亚标准
TM
与使用冷热水的交联聚乙烯管(PE-X)
配合使用的机械连接件
First published as AS 2537—1 982. 最初版本首次刊印为AS 2537—1 982。 Second edition 1994. 第二版为1994版。
Reissued incorporating Amendment No. 1 (December 2002). 重新发行配合使用修订本No.1（2002年12月）
? Standards Australia International
?澳大利亚国际标准
All rights are reserved. No part of this work may be reproduced or copied in any form or by any means, electronic or mechanical, including photocopying, without the written permission of the publisher.
版权所有，违者必究。未经出版商书面同意，该标准的任何部分都不得以任何形式或通过任何方式（电子方式、物理方式，包括复印）进行复制或拷贝。
Published by Standards Australia International Ltd GPO Box 5420, Sydney, NSW 2001, Australia 由澳大利亚国际标准有限公司出版，地址：PO Box 5420, Sydney, NSW 2001, Australia ISBN 0 7337 9282 6