元器件交易网http://www.77cn.com.cn
Pin Configuration (3,4,5,6,9) (con't.)
01/23/03
5666drw02c
NOTES:
1.Pin is a NC for IDT70T3599 and IDT70T3589.2.Pin is a NC for IDT70T3589.
3.All VDD pins must be connected to 2.5V power supply.
4.All VDDQ pins must be connected to appropriate power supply: 3.3V if OPT pin for that port is set to VDD (2.5V), and 2.5V if OPT pin for that port is
set to VSS (0V).
5.All VSS pins must be connected to ground supply.
6.Package body is approximately 15mm x 15mm x 1.4mm with 0.8mm ball pitch.7.This package code is used to reference the package diagram.8.This text does not indicate orientation of the actual part-marking.
9.Pins B14 and R14 will be VREFL and VREFR respectively for future HSTL device.