元器件交易网http://www.77cn.com.cn
Recommended Operating
(1)
5666 tbl 04
NOTES:
1.This is the parameter TA. This is the "instant on" case temperature.
Recommended DC OperatingConditions with VDDQ at 2.5V
SymbolVDDVDDQVSSVIH
ParameterCore Supply VoltageI/O Supply Voltage(3)Ground
Input High Volltage(Address, Control &Data I/O Inputs)(3)Input High Voltage _JTAG
Input High Voltage -ZZ, OPT, PIPE/FTInput Low VoltageInput Low Voltage -ZZ, OPT, PIPE/FT
Min.2.42.401.7
Typ.2.52.50
____
Max.2.62.60
VDDQ + 100mV(2)
UnitVVVV
VIHVIHVILVIL
1.7VDD - 0.2V-0.3(1)-0.3(1)
____
VDD + 100mV(2)VDD + 100mV(2)
0.70.2
VVVV
5666 tbl 05a
____
____
____
NOTES:
1.VIL (min.) = -1.0V for pulse width less than tCYC/2 or 5ns, whichever is less.
2.VIH (max.) = VDDQ + 1.0V for pulse width less than tCYC/2 or 5ns, whichever is less.3.To select operation at 2.5V levels on the I/Os and controls of a given port, the OPT
pin for that port must be set to Vss(0V), and VDDQX for that port must be supplied as indicatedabove.
Recommended DC OperatingConditions with VDDQ at 3.3V
SymbolVDDVDDQVSSVIH
ParameterCore Supply VoltageI/O Supply Voltage(3)Ground
Input High Voltage(Address, Control&Data I/O Inputs)(3)Input High Voltage _JTAG
Input High Voltage -ZZ, OPT, PIPE/FTInput Low VoltageInput Low Voltage -ZZ, OPT, PIPE/FT
Min.2.43.1502.0
Typ.2.53.30
____
Max.2.63.450
VDDQ + 150mV(2)
UnitVVVV
VIHVIHVILVIL
1.7VDD - 0.2V-0.3(1)-0.3(1)
____
VDD + 100mV(2)VDD + 100mV(2)
0.80.2
VVVV
____
____
____
5666 tbl 05b
NOTES:
1.VIL (min.) = -1.0V for pulse width less than tCYC/2, or 5ns, whichever is less.
2.VIH (max.) = VDDQ + 1.0V for pulse width less than tCYC/2 or 5ns, whichever is less.3.To select operation at 3.3V levels on the I/Os and controls of a given port, the OPT pinfor that port must be set to VDD (2.5V), and VDDQX for that port must be supplied as indicatedabove.